Saipem is a large, international and one of the best balanced turnkey contractors in the oil & gas industry.
Saipem has a strong bias towards oil and gas related activities in remote areas and deepwater and is a leader in the provision of engineering, procurement, project management and construction services with distinctive capabilities in the design and the execution of large-scale offshore and onshore projects, and technological competencies such as gas monetization and heavy oil exploitation.
Eni Saipem Contracting Nigeria Limited (SCNL) is a subsidiary of SAIPEM.
Due to the expansion of our operations in Nigeria, we are seeking for highly qualified professionals, pro-active, fast learning, well organized and motivated resources for the following positions within the Company.
1. Job Title: Electrical Engineer (EER)
Location: Port Harcourt/Remote Sites
Reporting to: Electrical/Discipline Lead
Duties and Responsibilities
• Take part in the review of Client’s technical documentation and requirements, electrical system basic design, electrical system design review and definition of electrical engineering requirements
• Prepare materials MTO for cost estimate, bill of quantities (BOQ) for erection works estimate.
• Reviews Client’s technical documentation and requirements
• Prepares Project Design criteria for electric system
• Performs electric system models & calculations and define ratings of equipment/systems (power demand, load flow, short circuits, transient stability, motor starting, harmonics, grounding)
• Prepares relay and metering schemes, protective relays coordination study and setting tables
• Prepare technical documentation (specification, data sheets and inspection data sheets) for electrical equipment and materials included in package units.
• Prepare Material Requisition (PR) and prepares the technical evaluations, technical support to procurement department in purchasing activities.
• Prepares electric substation layout arrangement, interconnecting wiring diagrams, checks and review electrical cable lay down documentation and electrical network layout documentation (grounding, lighting, cathode protection, electric tracing, and connection boxes)
• Participate in functional checks and test for electrical system energisation and commissioning
Qualification and Experience
- A Minimum of 5 years of cognate experience in Electrical designs
- A University Degree in Electrical Engineering
- Engineering Standard Codes & Regulation Knowledge
- Knowledge of Electrical Design Software (SPEL, Micro Station, PDMS)
- Good Computer Skills – Proficient in MS Office Suite.
2. Job Title: Electrical Designer (EDR)
Location: Port Harcourt/Remote Sites
Reporting to: Electrical Discipline Lead
Duties and Responsibilities
• Prepare materials MTO for cost estimate and bill of quantities (BOQ) for erection works estimate, electrical system installation
• Reviews Client’s technical documentation and requirements and coordinates subcontracted discipline engineering activities and controls subcontracted discipline engineering documents
• Prepare technical documentation (specification, data sheets and inspection data sheets) for electrical bulk materials requisitions and prepares, according to internal procedures, the technical evaluations and Material Requisition (PR) and technical evaluations of electrical bulk materials.
• Performs the follow up of electrical bulk materials supply and check/review of Vendors technical documentation
• Prepares electrical cable lay down documentation
• Implements detail engineering activities (positioning, layouts, cable routing, cable raceways, cable schedules, supports.
• Participates to 3D Modeling activities and Review of Engineering Documentation.
Qualification and Experience
- A Minimum of 5 years of cognate experience in Electrical designs
- HND/University Degree in Electrical Engineering
- Engineering Standard Codes & Regulation Knowledge
- Knowledge of Electrical Design Software (SPEL, Micro Station, PDMS)
- Good Computer skills – Proficient in MS Office Suite
3. Job Title: Electrical Draftsman (EDFM)
Location: Port Harcourt/Remote Sites
Reporting to: Electrical Engineer/Discipline Lead
Duties and Responsibilities
• Perform all drawings and technical documents prepared by the Electrical Project Specialist Lead, Engineers and Designers
• Management of electrical subcontracted engineering documents
• Prepares Electrical bulk material data sheets and specification and material take – off
• Implement detail engineering activities (layouts, routings, supports, and lighting etc and electrical load list and cable schedule
Qualification and Experience
- A Minimum of 4 years of cognate experience in drafting
- HND/University Degree in Electrical Engineering
- Engineering Standard Codes & Regulation Knowledge
- AUTOCAD/SPEL
- Good Computer skills – Proficient in MS Office Suite
4. Job Title: Static Equipment Engineer (SEER)
Location: Port Harcourt/Remote Sites
Reporting to: Static Equipment Discipline Lead
Duties and Responsibilities
• Manage basic and detail engineering activities
• Prepares detail engineering documentation in compliance with the process requirements and technical specifications (equipment mechanical data sheets etc.)
• Reviews Client’s project specifications and requirements
• Prepares the technical documentation for the equipment procurement and Participate in the technical evaluation of bids
• Reviews Client’s technical documentation and requirements
• Provide technical support during plant construction, pre-commissioning and commissioning phases
• Perform the technical bid analysis under the responsibility of the Static Equipment Specialist Lead
• Overviews tender or contract documents to identify the disciplinary project requirements, the available data/information and the required scope of work.
Qualification and Experience
- A Minimum of 5 years of cognate experience in Mechanical Engineering Designs
- University Degree in Mechanical or Production Engineering
- Engineering Standard Codes & Regulation Knowledge
- Good Computer skills – Proficient in MS Office Suite
5. Job Title: Rotating Equipment Engineer (REER)
Location: Port Harcourt/Remote Sites
Reporting to: Static Equipment Discipline Lead
Duties and Responsibilities
• Support Lead to reviews Contractual technical documentation and requirement
• Support Lead to define engineering requirements and interface with other disciplines and optimizes systems ensuring minimal cost and simplification in compliance with the required performance
• Prepares the technical documentation for package requisitions (supply specific, data sheets, where requested)
• Support Lead in technical negotiation with vendors and controls of subcontracted discipline engineering documents
• Prepares technical evaluation and technical tabulation for vendor technical alignment
• After order award: follow-up of assigned equipment/package to be supplied
• Check and signs all vendor, drawings in coordination with other disciplines
• Attends to internal review activities and participates in inter-discipline check meeting (where required)
• Define detail engineering activities (layouts, routings, supports...)
• Provide support for document management and prepare final documentation book
• Take part in site supervision, inspection, testing and quality controls if needed
• Prepare material take – off to support construction cost estimate
• Support Lead in defining cost evaluation for assigned items and engineering man hour estimate
Qualification and Experience
- A Minimum of 5 years of cognate experience in Mechanical Engineering Designs
- University Degree in Mechanical or Production Engineering
- Engineering Standard Codes & Regulation Knowledge
- Good Computer skills – Proficient in MS Office Suit
6. Job Title: Loss Prevention Engineer (LRER)
Location: Port Harcourt/Remote Sites
Reporting to: Loss Prevention Lead & QHSE Manager
Duties and Responsibilities
• Provide computations, simulations, preparation of safety deliverables necessary to develop technical proposal
• Checks quality and suitability of calculations, simulations of various processes
• Participates in interdisciplinary check of documents for its field of activity
• Performs hazard identification and consequence evaluation;
• Prepares the specification of passive fire protection and fire & gas detection systems;
• Prepares fireproofing, fire and gas detection, safety equipment locations and escape routes drawings
• Produces safety review reports;
• Performs risks analysis and/or reliability studies;
• Verifies the correct implementation of the safety aspects in the design and vendors documentation through audits and reviews
Qualification and Experience
- A Minimum of 4 years of cognate experience in Safety Engineering & HSE systems Management
- HND/University Degree in any Engineering Discipline)
- Engineering Standard Codes & Regulation Knowledge
- Good Computer skills – Proficient in MS Office Suite
- Good understanding of loss Prevention Engineering
- Must hold a recognized HSE certification on Risk Management
7. Job Title: Instrumentation Engineer (IER)
Location: Port Harcourt/Remote Sites
Reporting to: Instrumentation Lead
Duties and Responsibilities
• Prepare technical documentation for Instrumentation requisitions
• Prepare specifications for instruments and for instrumentation installation
• Perform Instrumentation P & ID mechanization
• Prepare instrument data sheets and instrument material take – off
• Participate in 3D Modeling activities and F.A.T activities
• Modify engineering drawings in coordination with instrument lead and instrument superintendent
• Check Key Engineering documents according to internal procedures
• Project coordination: provide input to discipline lead to harmonize design and project management methodologies
• Participate in the modification of company work flow and technical standardization
• Collect project feedbacks for continuous improvement implementation
• Coordinates subcontracted discipline engineering activities and controls subcontracted discipline engineering documents.
Qualification and Experience
- A Minimum of 5 years of cognate experience in Instrumentation design
- University Degree in any of Electrical or Electronic Engineering)
- Engineering Standard Codes & Regulation Knowledge
- Good Computer skills – Proficient in MS Office Suite
Job Title: Piping & Layout Engineer (PLER)
Location: Port Harcourt/Remote Sites
Reporting to: Piping Lead/Project Engineering Manager
Duties and Responsibilities
• Ensures Piping & Layout engineering support to different projects
• Analyzes the technical documents (specifications, calculation notes, drawings, etc) in order to assess the scope of the studies required and the potentials risks.
• Estimate quantities or validates estimation done by other specialist of the team
• Check all produced documents (internal or subcontracted) like design reports, technical specifications, drawings etc.
• Document the Piping and Layout methodologies/specific design guidelines
• Provide technical support to Procurement, Subcontracting and Construction activities included in the scope of work
• Supervises the writing of specifications and requisition as well as technical bid evaluations.
Qualification and Experience
- A Minimum of 5 years of cognate experience in Instrumentation design
- University Degree in any of Mechanical Engineering)
- Engineering Standard Codes & Regulation Knowledge
- Good Computer skills – Proficient in MS Office Suite
7. Job Title: Material Engineer (MER)
Location: Port Harcourt/Remote Sites
Reporting to: Piping Lead/Procurement Manager/Project Manager
Duties and Responsibilities
• Develop selection critical for material
• Reviews the Client’s technical documentation and requirements
• Responsible for the design of all piping component
• Issues project piping material specification and piping components data sheets
• Performs wall thickness calculations of pipes
• Issues technical specification for requisition of all piping components
• Issues technical bid evaluation for piping components offers
• Review and approve vendors documents
• Responsible for the establishment of the PMMS (Piping Material Management System) data base.
• Piping Material cost evaluation and validation cost estimate
• Participate in vendor and outsourcing qualification
• Participation in project/company procurement strategy (Purchasing team)
Qualification and Experience
- A Minimum of 5 years of cognate experience in Instrumentation design
- University Degree in any of Mechanical/Materials & Metallurgy Engineering)
- Engineering Standard Codes & Regulation Knowledge
- Good Computer skills – Proficient in MS Office Suite
8. Job Title: Piping Flexibility Engineer (PFER
Location: Port Harcourt/Remote Sites
Reporting to: Piping Lead/ Project Engineering Manager
Duties and Responsibilities
• Responsible for the design of all piping supports components
• Issue project piping flexibility (Stress analysis) specification critical lines list
• Perform calculations of critical piping networks
• Issues loads to allow the design of pipe –rack and foundation
• Issues technical part of requisitions for all piping supports components required by flexibility analysis
• Issues technical bid evaluation for all piping supports components offers
• Check sub-contracted discipline engineering documents in accordance with the scope of piping flexibility section
• Check documents issued by piping flexibility engineers
• Check the isometrics for construction of critical lines
• Assist P&ID section preparation for flexibility inputs of line list
• Participate in the modification of company work flow and technical standardization
• Particpate in vendor and outsourcing qualification
Qualification and Experience
- A Minimum of 5 years of cognate experience in Instrumentation design
- University Degree in any of Mechanical/Materials & Metallurgy Engineering)
- Engineering Standard Codes & Regulation Knowledge
- Good Computer skills – Proficient in MS Office Suite
- Knowledge of Stress Analysis software (Ceaser)
9. Job Title: Mechanical & Package Specialist Engineer (MPER)
Location: Port Harcourt/Remote Sites
Reporting to: Package Specialist Lead/Project Engineering Manager
Duties and Responsibilities
• Review of technical tender documentation
• Prepares material take –off to support construction cost estimate
• Support Lead in defining cost evaluation for assigned items, define engineering man hour estimate, reviews of Contractual technical documentation and requirements as well as define engineering requirements and interface with other disciplines
• Prepares the technical documentation for package requisition (supply specific, data sheets, calculations etc., where requested)
• Prepares technical evaluation and technical tabulation for vendor technical alignment
• After order award: follow – up of assigned equipment/package to be suppiled
• Define detail engineering activities (layouts, routing, supports)
Qualification and Experience
- A Minimum of 5 years of cognate experience in Mechanical Engineering
- University Degree in any of Mechanical Engineering)
- Engineering Standard Codes & Regulation Knowledge
- Good Computer skills – Proficient in MS Office Suite
10. Job Title: CAD Administrator (CADA)
Location: Port Harcourt/Remote Sites
Reporting to: Piping Lead & Process Lead Engineer
Duties and Responsibilities
• Prepares the Project specification for 3D software set up and 3D tools set up and support (all the tools for 3D design)
• RDB preparation and follow up
• Isometric issue set up
• MTO extraction from 3D software to Piping Material Management System
• As Built set up in 3D model
• Provide input to disciple leads to harmonize design and project management methodologies
• Participate in the modification of company work flow and technical standardization.
Qualification and Experience
- A Minimum of 5 years of cognate experience in Engineering Designs
- University Degree in any of Engineering Discipline)
- Engineering Standard Codes & Regulation Knowledge
- Good Computer skills – Proficient in MS Office Suite
- Detailed Knowledge of Design Software’s (PDS & PDMS)
11. Job Title: P & IDs Designer (PIDD)
Location: Port Harcourt/Remote Sites
Reporting to: Piping & Layout Lead & Process Lead Engineer
Duties and Responsibilities
• Initiates P & ID’s general legend sheets for equipment, piping and instrumentation symbols and numbering procedures, creates typical piping arrangements to be standardized for P & ID’s homogenization and consistency.
• Initiates P & ID’s typical legend sheet with equipment, instrumentation and client guidelines, for instrumentation hook-up, electrical motors instrumentation, actual valves details, motorised valves details, sample connection typical.
• Ensures development of P & ID’s based on process PFD’s cut and applying engineering proper general criteria and guidelines.
• Participates in P & ID’s associated deliverables and ensures data filling (line list, tie-in list...)
• Defines Cad draft guidelines procedure when not available. Ensures strict application of client CAD symbol and CAD procedure when existing. Develops and updates client CAD procedure.
• Issues and develops a P & ID’s check list of standardization for recurrent topics per revision. Checks constantly homogeneity and consistency between P & ID’s
• Particpates in the collective P & ID’s review with Process and Engineering Disciplines.
• Ensures total traceability of P & ID’s modifications
Qualification and Experience
- A Minimum of 5 years of cognate experience in Engineering Designs
- HND/University Degree in any Process/Petroleum Engineering/Mechanical)
- Engineering Standard Codes & Regulation Knowledge
- Good Computer skills – Proficient in MS Office Suite
- Knowledge of Design Software’s (PDMS & PDS)
12. Job Title: Material Engineer (PER)
Location: Port Harcourt/Remote Sites
Reporting to: Process Lead Engineer
Duties and Responsibilities
• Provide Lead Engineer with computations, simulations, preparation of data sheets and process deliverables necessary to develop the technical proposal
• Check quality and suitability of calculations, softwares simulations and deliverables prepared by the team
• Develop Heat & Material Balances using simulation software
• Develop Process Flow diagrams to show unit operations necessary to convert feedbacks into on-specification products, in the most economical manner
• Define and sizes Equipment and Instrumentation to be implemented and issues relevant Process Data sheets.
• Performs hydraulic and thermal calculations on piping systems, steadt state and transient operation
• Define quantities and characterstics of effluents to be disposed to the environment
• Ensures the preparation of Operating Manual and Test Run procedures
• Check technical quality of calculations, softwares simulations and deliverables produced by junior engineers
• Take part in the multidisciplinary project reviews such as P & ID’s
Qualification and Experience
- A Minimum of 5 years of cognate experience in Engineering Designs
- University Degree in any Process/Petroleum Engineering)
- Engineering Standard Codes & Regulation Knowledge
- Good Computer skills – Proficient in MS Office Suite
- Knowledge of Design Software’s. (HYSSIS/Flarenet)
Job Title: Civil & Structural Engineer (CSER)
Location: Port Harcourt/Remote Sites
Reporting to: Lead Civil Engineer
Duties and Responsibilities
• Set up and executes assigned engineering activities such as detail design, verification and studies relevant to any engineering issues associated with Discipline
• Prepare design specifications for concrete foundation and steel design
• Develops studies and calculation notes for reinforced concrete, pilling works, steel structures (including connection details) and structural concrete/steel buildings
• Prepare SOW and technical documentation for soil investigation contract
• Issues the technical bid tabulation for all geotechnical technical offer
• Validates and issues project geotechnical specifications.
Qualification and Experience
- A Minimum of 5 years of cognate experience in Engineering design
- A University Degree in Civil/Structural Engineering)
- Engineering Standard Codes & Regulation Knowledge
- Good Computer skills – Proficient in MS Office Suite
- Knowledge of Design Software’s (STADPRO/TEKLASAP)
Qualified applicants should visit http://www.saipem.com/site/Home/Job.html (Visit the professionals Hire section) or http://efesto.saipem.eni.it/Released/Home.aspx (Nigeria Geo Area) to apply and upload thier resume within 2 weeks of this publication.
Note: only short listed candidates will be contacted.
No comments:
Post a Comment